LiteTouch Replacement Cost Calculator
Get a price range for replacing your discontinued LiteTouch system with LOXONE — in 60 seconds.
Replacing a LiteTouch lighting system with LOXONE typically costs $8,000–$12,000 under 2,500 sq ft, $14,000–$20,000 for 2,500–4,000 sq ft, $20,000–$30,000 for 4,000–6,000 sq ft, and from $35,000 above 6,000 sq ft (most large estates $50,000–$120,000+) in the Houston area, depending on the number of keypads, lighting modules, home size, and add-on features like audio, climate, or motorized shades. Use this calculator to get an instant ballpark estimate based on your specific system.
What this price range covers
- LOXONE Miniserver, dimmer and relay extensions
- Replacement keypads on existing LiteTouch wall openings
- Reuse of your existing keypad wiring: Loxone Tree where a run has 4 or more conductors, Loxone Air where it has 3
- Power supplies, cabling, and panel hardware
- Houston area: Removal of the legacy LiteTouch panel, installation, programming, and commissioning
- Outside Texas: Programming and remote commissioning by Grizzly Tec. Installation by your local electrician.
- Labor for your project (installation, programming and commissioning in the Houston area; programming and commissioning only outside Texas)
What this price range does not include
- Rewiring for damaged or non-compliant cable runs (assessed on-site)
- Drywall, paint, or trim repair beyond the keypad footprint
- Add-ons like audio, motorized shades, or HVAC integration (priced separately)
- Permits or HOA review fees
Estimates are a ballpark. A $450 diagnostic, remote or on-site and 100% credited toward your project, verifies wiring condition and finalizes the quote.
What Will It Cost to Replace Your LiteTouch System?
Enter your system details below for an approximate price range based on your home size.
Homes like yours in the Houston area usually come in at $14,000–$20,000 installed (lighting only).
Where is the house?
Enter the quantity of each LiteTouch module in your panel:
Set the quantity for each module type you have. Leave at 0 for modules you don't have.
| Part # | Module Name | LOXONE Replacement | Qty |
|---|---|---|---|
| 08-2108-01 | 8 Channel Dimmer Module→ Dimmer Extension (x2) | Dimmer Extension x2 | |
| 08-2134-01 | Quad II Dimmer Module→ Dimmer Extension (x1) | Dimmer Extension x1 | |
| 08-2118-01 | Fan Speed Control Module→ Dimmer Extension (x1) | Dimmer Extension x1 | |
| 08-2140-01 | Inverse Phase Dimmer Module→ Dimmer Extension (x2) | Dimmer Extension x2 | |
| 08-2150-01 | Electronic Ballast Dimmer Module→ AO Extension (x2) | AO Extension x2 | |
| 08-2208-01 | 8 Channel Relay Module→ Relay Extension (x1) | Relay Extension x1 | |
| 08-2200-01 | 6 Channel Relay Module→ Relay Extension (x1) | Relay Extension x1 | |
| 08-2100-01 | 6 Channel Dimmer Module→ Dimmer Extension (x2) | Dimmer Extension x2 | |
| 08-2210-01 | High Power Relay Module→ Relay Extension (x1) | Relay Extension x1 | |
| 08-2235-01 | Low Voltage 8 Channel Relay Module→ Relay Extension (x1) | Relay Extension x1 | |
| 08-2290-01 | Maintained Contact Data Input Module→ DI Extension (x1) | DI Extension x1 | |
| 08-2290-02 | Momentary Contact Data Input Module→ DI Extension (x1) | DI Extension x1 | |
| 08-8610-01 | Single Power Supply Module→ Power Supply (x1) | Power Supply x1 | |
| 08-8620-01 | Dual Power Supply Module→ Power Supply (x2) | Power Supply x2 |
What else would you like to automate beyond lighting?
Are you interested in dimming the lights or just on and off?
Current system status
Almost there — where should we send your estimate?
Fill in your details below to see your personalized LiteTouch replacement estimate.
Daniel Lopez
Mechatronics Engineer & LOXONE Partner since 2015, Platinum today
Want the Full LiteTouch Replacement Guide?
Costs, timeline, wiring assessment, comparison with Lutron & Control4, and what to expect at every step.
Read the Complete Guide →Frequently Asked Questions
This calculator gives a price range for your home size, based on typical LiteTouch-to-LOXONE replacement projects in Houston. Actual costs vary based on wiring condition, panel accessibility, fixture compatibility, and specific home layout. A $450 diagnostic, remote or on-site, 100% credited toward your project, will give you a precise quote tailored to your home.
The calculator shows a price range for your home size, covering LOXONE lighting control hardware and labor (installation, programming and commissioning in the Houston area; programming and commissioning only outside Texas). Climate, audio and shades are priced separately, and so are optional upgrades like touch panels, additional sensors, or cosmetic work. The exact price comes from the $450 diagnostic, credited toward your project.
Retrofit projects typically take 3–5 days, or 1–2 weeks for large homes.
In most cases, yes. LiteTouch systems use low-voltage wiring between keypads and the central panel. We reuse the existing keypad wiring: LOXONE Tree where a run has 4 or more conductors, and LOXONE Air where it has 3. This significantly reduces installation cost and disruption. We verify wiring condition during the $450 diagnostic (remote or on-site, 100% credited toward your project).
Ready for an Exact Quote?
We'll evaluate your LiteTouch system, check wiring, and provide a detailed LOXONE upgrade proposal. Remote or on-site. 100% credited toward your project.
Book a Diagnostic: $450, credited toward your projectAutomate the Ordinary. Live the Extraordinary.